Cleaning And Maintenance; Technical Data - Beper BP.581 Manual De Instrucciones

EN
Electric Coffee Grinder Use instructions
Product description Fig.A
1. On/Off button
2. Transparent lid
3. Blade
4. Coffee beans container
5. Motor base
OPERATION
Before switching on the appliance for first time, remove the packages and make sure that the product is in good
condition and clean as described on appropriate chapter.
Place the appliance on a stable, flat surface.
The coffee grinder has a safety system: if the lid is not correctly inserted, the coffee grinder will not work and the
blades will not be activated. This safety system is very important because it excludes the operation of the blades
if the lid is not present or well inserted.
To put the coffee beans inside the container, remove the lid and introduce a quantity of beans not exceeding 100
grams. If you intend to grind a larger quantity of grains, it is necessary to repeat the operation several times, not
to insert more beans than the capacity of the container.
Higher quantities of grind grains compromise the functioning of the coffee grinder.
Close the lid by inserting it correctly.
Plug in.
Press and hold the operating button for the time necessary to reach the fineness of the desired ground.
The grinding time can vary from 15 to 25 seconds average.
Do not operate the coffee grinder for more than 60 seconds continuously. Wait 1 or 2 minutes after each use,
before operating the blades again.
Never operate the blades if there are no coffee beans inside the container.
At the end of the operation, release the operation button.
Before removing the lid, at the end of grinding, always wait for the blades to stop completely.

CLEANING AND MAINTENANCE

Before cleaning, unplug the unit.
Do not immerse the appliance into water or other liquids, don't wash under tap.
Wipe the body and the container of the coffee grinder with a soft damp cloth.
Wash the lid under tap and wipe well.
Do not use abrasive products or metal sponges as they may damage the surfaces of the coffee grinder.
Before storing the coffee grinder, make sure that all parts are completely dry.
Store the coffee grinder in a dry and clean place.

TECHNICAL DATA

Power: 250W
Power Supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9