Descargar Imprimir esta página

Installation Procedure; Connecting The Battery Box - Schrack BX01P108007 Serie Manual De Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

I
NSTALLATION
The company accepts no responsibility for damage caused by wrong connections or by operations not
described in this manual.
The BATTERY BOX electrical specifications are shown on the data plate at the back of the device.
I
NSTALLATION PROCEDURE
Before connecting the BATTERY BOX to the UPS ensure that the following notes are complied with:
Install the BATTERY BOX on a flat and stable surface.
Avoid placing it where it will be exposed to direct sunlight or hot air
Keep ambient temperature between 0°C and 40°C
N.B.: the BATTERY BOX can operate with ambient temperature between 0°C and 40°C. The
optimal operating temperature of the batteries contained in the BATTERY BOX is between 20 and
25°C. While the operating life of the batteries is on average 4 years with ambient temperature of
20°C, battery life is halved with the temperature at 30°C.
The ambient relative humidity must not exceed 90%.
Avoid dusty environments.
Take care to position the BATTERY BOX with the front and the back at least 10 cm from walls and
ensure that objects are not placed on the air slots, so as to allow adequate ventilation.
The cable connecting the BATTERY BOX to the UPS cannot be extended by the user. The supplier
should be contacted if this is required.
C
ONNECTING THE
Check that the BATTERY BOX battery voltage is the same as the voltage allowed by the UPS
(check the data plate at the back of the BATTERY BOX and the UPS manual)
Depending on requirements, connect the BATTERY BOX to the UPS or to another BATTERY
BOX by means of the expansion cable provided
Insert the two fuses provided into the fuse-holder disconnecting switches at the back of the
BATTERY BOX. Close the disconnecting switches.
(only for the version with battery charger): connect the power cable to the BATTERY BOX and o
the mains. The LED indicating mains present will light up immediately. The LED indicating battery
charger operating will also light up after a few seconds' delay.
BATTERY BOX
38

Publicidad

loading

Este manual también es adecuado para:

Bx01c108014 serieBx01v108007 serieBx01k108014 serie