System Screen; Blinking Codes; System Screen Blinking Codes - Sonnenkraft SKSC2 Manual Del Usuario

System-Monitoring-Display / Blinking codes
2.2.3

System screen

only system screen
Collector 1
Valves
Pumps
Store heat exchanger
2.3

Blinking codes

2.3.1

System screen blinking codes

Sensors
Collector 2
Store
Collectors
with collector sensor
Store 1 and 2
with heat exchanger
3-way-valves
The fl ow direction or the cur-
rent breaking capacity are al-
ways shown.
The system screen (active system scheme)
shows the schemes selected on the controller. It
consists of several system component symbols,
which are - depending on the current status of
the system - either fl ashing, permanently shown
or hidden.
Sensor store up
Heating circuit
Store 2 or after-heating
(with additional symbol)
• Pumps are blinking during starting phase.
• Sensors are blinking if the respective sensor-
indication channel is selected.
• Sensors are quickly blinking in case of sensor
defect.
• Burner symbol is blinking if after-heating is
activated.
Valve
Sensor
Additional symbol
for operation of
the burner
Temperature sen-
sor
Heating circuit
Pump
After-heating
with burner symbol
13