Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Congratulations on your purchase of the Phonic Powerpod 410R
Powered Mixer. The Powerpod 410R is built into a rugged cabinet
for heavy-duty use. In order to get the best performance from
your Powerpod 410R, please read all of this safety and operation
manual before operating the mixers and keep the manual for
future reference.
FEATURES
4 mono input channels for a wide range of Microphone and
Line level signals from separate input sockets
Built-in 100 watt power amplifier (max. output)
USB port for recording and playback
Class D circuitry on built-in amplifier
Built-in Digital Delay
Super musical 2-band EQ at mono channels
Record out through RCA connectors
RCA tape in with level control
GETTING STARTED
1. Before turning on the power, set the Master output control to
the off position.
2. Always turn the power off before connecting or disconnecting
cables.
3. Check the AC Voltage before connecting the AC plug.
4. Do not obstruct the back panel at all for proper ventilation.
4
CHANNEL STRIP DESCRIPTION
1.
LOW EQ
The control has shelving response giving 15dB of boost or cut
at 80Hz. Add warmth to vocals or extra punch to guitars, drums
and synths by turning to the right. Turn to the left to reduce stage
rumble, hum or to improve a mushy sound.
2.
HIGH EQ
Turn to the right to boost high frequencies, adding crispness to
percussion from drum machines, cymbals and synths. Turn to the
left to cut these frequencies, reducing sibilance or hiss. The control
has a shelving response giving 15dB of boost or cut at 12kHz.
3.
LEVEL CONTROL
The Level Control determines the proportion of the channel sig-
nal in the mix, and provides a clear visual indication of channel
level.
4.
MIC & LINE INPUT
The MIC input accepts XLR phone jack while the LInE input
accepts a 1/4" type phone jack. Please use a low impedance
microphone and a properly wired cable for best results. You can
only use one of the two connectors at any one time.
5.
EFFECT
This knob decides the signal level which will be sent to the built-in
digital delay effect control.
1
2
5
3
4
POWERPOD 410
R
Publicidad
Tabla de contenido
