Troubleshooting; Technical Specifications - ECG MH 158 Manual De Instrucciones

TROUBLESHOOTING

Problem
The power LED does not work
The temperature is too low or too
high

TECHNICAL SPECIFICATIONS

Container volume: 5 l
Maximum amount of oil: 2.9 l
Nominal voltage: 220–240 V~ 50–60 Hz
Nominal input power: 1500 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the speci ed location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
MH 158_manual_cz_sk_pl_hu_de_en_hr_si_fr_it_es_lt.indb 41
Solution
Make sure that the container with non-stick surface is properly
attached to the base. Check if the power cord is correctly plugged in.
Set the required temperature. Turning the controller to the right
increases temperature, turning to the left lowers it.
GB
08/05
41
03.09.2019 14:02:45