Quick Start Up - Akiyama AW-05 HCT-054 Manual De Instrucciones

CONNECTION
Akiyama AW series has spring clip which accept heavy
gauge stripped wires. Generally, the longer the speaker
wire, the heavier gauge wire should be used to prevent
signal loss in the wire, always ensure that loudspeakers
are in phase. The + terminal of the loudspeaker is
connected to the + terminal of amplifier and the - terminal
of the loudspeaker is connected to the - terminal of

QUICK START UP

Salida (Output) de reproductor de
CD, MP3, MD, Cassette, PC audio
MAINTENANCE
All Akiyama loudspeakers are made of modern
thoroughly tested materials, which usually require no
maintenance, but dusting or drying with a soft, dry cloth.
2
R/L
Channel Input
amplifier.
In the following pages of this manual you will find a
detailed explanation of system set-ups, but if you just
want to get started quickly, you can follow the diagram
and steps below to set up a basic stereo PAsystem.
PowerAmp. Outputs
R/L
Master Output
If the loudspeakers have become greasy, the grease may
be removed by a damp cloth with water and possible
using a mild detergent.
AW-05