Safeline MX3+ Guia De Inicio Rapido página 26

Alarm Type
Alarm type 1st number
Alarm type 2nd number
Alarm type 3rd number
Alarm type 4th number
Alarm type LMS
Alarm type Test alarm
Distress message
Record distress message
played in the lift car
Record alarm message from
Lift Car to alarm central
Options for the recorded
distress message
Options for the recorded
message from Lift Car
Code Data
*41* - - #
*42* - - #
*43* - - #
*44* - - #
*45* - - #
*46* - - #
Code Data
*51* "Speak" #
*52* "Speak" #
*61* - #
*61* #
*62* - #
*62* #
26
Comments
Only when using CPC as alarm protocol
Normally 10 or 27.
Normally 17
Normally 26
Comments
This message will be played in the lift car
when the emergency lift telephone starts
calling the alarm centre. Make sure that
there is no noise in the background when
recording the message.
Example of message:
Please do not panic, the emergency
telephone is now calling the emergency call
centre.
This message will be played to the alarm
receiver and in the car when the call is
answered. Make sure that there is no nose
in the background when recording the
message.
Example of message:
This is an alarm from the lift on 5th avenue.
To hear the quality of the message, press
"1".
To terminate the call press "#".
To play the recorded message, press the
desired parameter followed by #.
0 = Disable recorded message.
1 = Enables recorded message.
English