Safeline MX3+ Guia De Inicio Rapido página 27

Other codes
Emergency signal in speaker
Additional input function
Additional input type
Indicator mode
Unit number
Alarm button delay time
Alarm button type
Change password
Code Data Comments
*71* - # The speaker siren will sound at emergency call.
0 = Off (default)
1 = On
*73* - # Selects input function:
0 = None (Default)
1 = Filter, blocks the alarm input when active.
2 = LMS (Lift Monitoring System), sends a lift
monitoring alarm at input activation.
3 = Clear/Maintenance
4 = Call Delay
*74* - # 0 = Normally-open contact, N/O (Default)
1 = Normally-closed contact, N/C
*78* - # 0 = Standard (default)
1 = Strictly EN81-28
2 = Strictly single EN81-28
*82* - # Unit number [0] is set by default, and means that
the unit will respond immediately.
Unit number [1-9] is used when the units are
sharing the same phone line. When the unit
number is assigned, the specified unit is accessible
for configuration.
*87* - - # Delay time from pressing the alarm button until
activating the alarm.
00-25 seconds. Default = 05
*89* - # 0 = Normally-open contact, N/O (Default)
1 = Normally-closed contact, N/C
*91* - - - - # Change password (default=0000).
27
English