Dometic ORIGO 2000 Instrucciones De Uso página 16

_Origo_2000_2500_4100_4300.book Seite 16 Freitag, 8. Januar 2010 3:35 15
Using the stove
8.4 Using the heating element
(Dometic ORIGO 2500 and 4300 only)
Caution!
a
Never use alcohol and electrical burners simultaneously to prevent
overheating which can destroy the heating element.
If applicable, remove the cutting board or lift the glass lid (both
accessory).
Note
I
For your safety the stove will switch off the mains when you replace
the cutting board or close the glass lid (both accessory).
To switch on the heating element push the button
the button "+".
Choose the desired power setting via the buttons "+" and "–".
The power is regulated in five steps and indicated by the LEDs (see table
below).
LED (fig. 3 1, page 2)
No LED glows
LED 1 glows
LED 1 and LED 2 glow
LED 2 glows
LED 2 and LED 3 glow
LED 3 glows
Pushing the buttons will change the power setting by one step, holding
down the buttons will change the power setting by more than one step.
To switch off the heating element push the button "0" symbol.
Let the stove cool down to room temperature, before you place the cutting
board or close the glass lid (both accessory).
16
Dometic ORIGO
and within 10 s
" "
Power setting
heating element is off
20 %
40 %
60 %
80 %
100 %