Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly Instructions
Ground Mounted
1. Assemble the mounting poles (B and C) and stake (D);
Carefully insert the stakes into the ground (as shown in
figure 1).
2. Slide the lamp unit (A) into the upper part of the
mounting poles carefully.

Wall mounted

1. Assemble wall-mounting bracket (E) to lamp unit (A)
using the screw (F) provided (as shown in figure 2).
2. Fix the wall-mounting bracket to the wall using the
screws and nags provided (G and H).
Free standing mounted
1. Assemble surface-mounting bracket (E) (Note that the
same bracket is now in a straight position) to lamp unit
(A) using the screw (F) provided (as shown in figure 3).
2. Fix the surface-mounting bracket to a deck or a wall top
using the screws provided (H).
Operation
1. Detach the upper cover (I) from part A (as
shown in figure 4).
2. Adjust the switch under the cover (I) to "ON"
position.
3. Reassemble the cover into the lamp unit (A).
Figure 4
3
EN
Figure 1
Figure 2
Figure 3

Publicidad

Tabla de contenido
loading

Tabla de contenido