Peripherals
By pressing Peripherals in the main MENU, you can join tool ports with peripherals
which means each tool can work with 1 module and 1 pedal at the same time.
Electric
Pneumatic
Desoldering
Desoldering
Module
Module
Ref. MSE-A
Ref. MVE-A
Function: Enable/disable the module or make any tool enter Sleep or Hibernation modes.
This pedal will work with any module or tool regardless of the module to which it is connected.
If you do not have a module, you can link up the P-305 Pedal Kit to the tool port.
6
Control
Unit
Nitrogen Flow
Fume Extractor
Regulator
Switch
Ref. MNE-A
Ref. FSE-A
Pedal
Ref. P-005
Compatibility
Select the equipment that best suit your soldering or desoldering needs.
Basic working system
Control
Cartridge
Stand
Tool
Unit
Range
T210-A
C210
AD-SD
T245-A
C245
T470-A
C245
C210
T210-NA*
T245-NA*
DN-SE
C245
T470-NA*
DDE-B
AP-SD
AP250-A
C130
PA-SD
PA120-A
C120
HT-SD
HT420-A
C420
DS-SD
DS360-A
C360
DR-SD
DR560-A
C560
* The MNE Nitrogen Flow Regulator is required.
**If you need to connect the MS, MV, MN or FS modules, an adapter is required (Ref. IM2496).
P-305 Pedal Kit
By using the Connection Box, the P-005
Pedal will work with only the tool port to
which it is connected.
Function:
Makes the tool enter/skip from Sleep mode.
w w w.jbctools.com
Peripherals**
MSE-A /
MNE-A
FSE-A
P-005
MVE-A
+
Connection Box
Pedal
Ref. 0012527
Ref. P-005
Tool port
connection
7