English
Instructions for use, applicators with 4 chambers
1. Connect the line(s) of the connector(s) to the applicator(s) that you want
to use.
Select the connector hose to be connected according to the applicators that you want
to use:
• with the leg cuffs, use the double connector hose (Fig. A on the next page);
• with the leg cuffs and the abdominal/buttocks belt, use the triple connector hose (Fig.
B on the next page);
• with the arm cuff, use the single connector hose (Fig. D on the next page);
• with the single abdominal/buttocks belt, use the single connector hose (Fig. C on the
next page).
Connect each nozzle (air outlet) present on the line(s) using the single, double or triple
connector hose to the relevant fittings present on the applicator(s) you want to use.
Nozzle (air outlet) on the
connector lines
When inserting the nozzles of the line(s) in use of the connector hose into the insert
present on the applicator (leg cuffs, arm cuff, abdominal belt), it is necessary to position
it on a flat and robust surface (e.g. a table) and exert enough pressure for it to snap in
and make a clicking sound.
Insert present on the applicators
IMPORTANT
44
User Manual: Xpress Beauty Clinic
Correct insertion of the nozzle
into the insert present on the appli-
cator. Exert enough pressure for it to
snap in and make a clicking sound.
Press with enough pressure for
it to snap in and make a clicking
sound.