Aux Sends - LD Systems LAX12DA Manual De Usuario

CONTROL ELEMENTS:
+4 dBu/-10 dBV SELECTION
6
The line inputs of the stereo channels have a button for selecting the input
fi devices, etc.). If you are uncertain which setting to use for the respectively

AUX SENDS

tionally to external effects processors or the like. In addition, these outputs
can be used as submix outputs.
PHONE
8
Headphones for monitoring the output signal (MAIN MIX) can be connected
The mono input channels of the LAX12DA are equipped with 3-band equa-
lizers (MID: with adjustable centre frequencies), the stereo channels with
4-band EQs with fixed centre frequencies (HI, HI-MID, MID-LOW and LOW).
HI
9
This knob is used to control the high frequencies. You can use it to add more
brilliance and presence to the corresponding signal or attenuate undesirably loud
MID
10
This knob is used to control the midrange frequencies. These are the most
important frequencies for musical instruments and the human voice (boost/
frequency that is to be boosted or cut (100 Hz to 8 kHz).
8
AUX SENDS
1
2
PHONE
- 8
•
9
• • • ••••••••••• • • •
•
10
• • • ••••••••••• • • •
• • •
• • • • • ••••••••••• • • • •
•
11
• • • ••••••••••• • • •
•
12
• • • ••••••••••• • • •
• •
13
• • • ••••••••••• • • •
EQ
HI
12kHz
MID
FREQ
LOW
80Hz
HI-MID
3kHz
MID-LO
500Hz