Advanced Functions - ECG RK 1777 Colore Manual De Instrucciones

2. Press briefly the button
C and the LED backlight on the kettle is red. The display shows the water temperature.
3. When the water boils, the kettle switches off, the indicator goes off and a beep sounds.
4. Unplug the cord from the outlet when you are finished using the appliance.

Advanced functions

Dechlorination function
Press briefly the button
A beep sounds and the dechlorination process starts. After 3 minutes of boiling, the cooking is switched off
automatically, a beep sounds and the dechlorination process is completed.
Water heating with maintaining temperature
1. Press the button
with maintaining temperature starts. LED backlight flashes red. After boiling (100 °C), the kettle will
automatically shut down, keep the water temperature for 2 hours, and the red backlight will flash. During
these two hours, the heating is always switched on when the water temperature drops to 85 °C.
GB
2. Press the button
maintaining temperature starts.
• Press once, the display shows 60 °C, LED backlight of the kettle flashes green. When the temperature
reaches 60 ° C, the kettle will automatically shut down, keep the water temperature for 2 hours, and the
green backlight will flash. During these two hours, the heating is always switched on when the water
temperature drops to 50 °C.
• Press twice, the display shows 70 °C, LED backlight of the kettle flashes blue. When the temperature
reaches 70 °C , the kettle will automatically shut down, keep the water temperature for 2 hours and the
blue backlight will flash. During these two hours, the heating is always switched on when the water
temperature drops to 60 °C.
• Press three times, the display shows 80 °C, LED backlight of the kettle flashes yellow. When the
temperature reaches 80 °C, the kettle will automatically shut down, keep the water temperature for 2
hours and the yellow backlight will flash. During these two hours, the heating is always switched on when
the water temperature drops to 70 °C.
• Press four times, the display shows 90 °C, LED backlight of the kettle flashes purple. When the
temperature reaches 90 °C, the kettle will automatically shut down, keep the water temperature for 2
hours and the purple backlight will flash. During these two hours, the heating is always switched on when
the water temperature drops to 80 °C.
Note: If you remove the kettle from the base, the temperature maintenance function will stop.
Heating the water to the required temperature
Press briefly the button
• Press once, the display shows 60 °C. LED backlight of the kettle lights green. When the temperature
reaches 60 °C, the kettle will automatically shut down.
• Press twice, the display shows 70 °C. LED backlight of the kettle lights blue. When the temperature
reaches 70 °C, the kettle will automatically shut down.
• Press three times, the display shows 80 °C. LED backlight of the kettle lights yellow. When the
temperature reaches 80 °C, the kettle will automatically shut down.
• Press four times, the diplay shows 90 °C. LED backlight of the kettle lights purple. When the temperature
reaches 90 °C, the kettle will automatically shut down.
Recommended temperatures for preparing individual beverages
Beverage
Sencha tea, children's foods
34
, a signal sounds and the heating starts. The base temperature is set to 100 °
. A beep sounds and water heating starts. Then press again the button
for 2 seconds, a beep sounds, the red button
for 2 seconds, a beep sounds, the red button
. A beep sounds and water heating starts. LED backlight shines red.
comes on and the water heating
comes on and the water heating with
Temperature settings
60°C
.
Tolerance
+/-5 °C