Maintenance Of The Unit; Working Time; Applications; Technical Features - BMS D-35 Manual De Instrucciones


Minimum maintenance is required. Always check the level of liquid in the
storage tank. Clean any possible residues from inside the tank when replacing the
liquid whenever it is depleted or exhausted.

The time required for effective cleaning may range from 30 to 90 minutes
depending on the amount of scale to be removed.

In the event that the scale to be removed is of considerable thickness,
cleaning should be performed in two stages, interchanging the input and output
lines so that the liquid passes in two directions.

After completing the cleaning process, allow water to flow through the circuit
for a few minutes.
- Regular treatment of heat exchangers.
- Maintenance of the mould cooling circuits.
- Removal of scale from autoclaves.
- Recipients
Capacity of the storage tank:
Pump power:
Electrical connections:
Pump pressure:
* 220V/50 HZ/3 Phase model is available on request.

3. Maintenance of the Unit

4. Working time

5. APPLICATIONS

6. TECHNICAL FEATURES

30 litres
0.5 Hp
380V/3/50HZ
1 bar 500 l/h
0.8 bar 1,450 l/h