Maintenance - Pilz PMI v315 ATEX Instrucciones De Uso

Maintenance

WARNING!
• Make sure that the atmosphere is not potentially explosive when you
carry out maintenance on the PMI!
• The protection type on the PMI may not be suspended for maintenance
purposes while the overall plant is in operation!
• Should you discover any damage to the touch membrane, such as tears,
the loss of individual membranes or broken glass on the touchscreen,
switch off the PMI immediately and replace the unit.
NOTICE
Clean the unit's touchscreen at regular intervals. Use a damp cloth to do
this.
Do not use thinners or organic solvents to clean the unit and touchscreen
interface.
NOTICE
The touchscreen interface is not abrasion resistant; if it is dirty, please
clean with care and do not apply heavy pressure.
Further information on care and maintenance of the touchscreen can be
found in chapter 7.
Operating Manual: PMI v315 ATEX/PMI o315 ATEX 3 - 7