Technical Specifications; Work Area Safety - LEMAN LOSAE250 Manual De Instrucciones

GB

TECHNICAL SPECIFICATIONS

- Voltage - Frequency: 230 V - 1~50 Hz
- Motor power: 2500 W – 3.3 CV
- Rotation speed: 6000~14000 rpm
- Air speed: 150~270 km/h
- Air flow: 360~8400 m³/h
- Chipping ratio: 10:1
- Collection bag capacity: 45 l
- Degree of protection: IPX4
- Protection class: II
- Overall dimensions (LxWxH): 1200 x 370 x 170 mm
- Electric cable length: 0.35 m
- Net weight: 3.010 kg
Sound level (according to EN ISO 3744):
- Sound pressure level: LpA = 86.5 dB(A)
- Sound power level: LwA = 103.0 dB(A)
Uncertainty K = 3 dB(A)
Wear ear protection!
Vibrations total value (tri-axial vector sum) according to EN 60745:
a
- = 2.76 m/s²
h(WB)
- Uncertainty K = 1.5 m/s²
CAUTION! Risk of injury due to vibrations!
- Vibrations may, in particular for persons with circulation problems, cause damage to blood vessels and/ or
nerves. If you notice any of the following symptoms, stop working immediately and consult a doctor: numbness of
body parts, loss of sense of feeling, itching, pins and needles, pain, changes in skin colour.
- The vibration values specified in the technical data represent the main uses of the device. The actual existing
vibrations during use may deviate from these as a result of the following factors:
- Incorrect use of the product.
- Unsuitable tools inserted.
- Unsuitable material.
- Insufficient maintenance.
You can reduce the risks considerably by fol-lowing the tips below:
- Maintain the device in accordance with the instructions in the operating instructions.
- Avoid working at low temperatures.
- When it is cold, make sure your body and your hands, in particular, are kept warm.
- Take regular breaks and move your hands at the same time to promote circulation.
GENERAL ELECTRIC TOOLS SAFETY WARNINGS
WARNING:
Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "electric tool" in the warnings refers to your
mains operated (corded) machine.

1. Work area safety

a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate electric tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Electric tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating an electric tool. Distractions can cause you to lose
control.
17