Main Components - Zibro SRE 172 E Instrucciones De Uso

GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for
using your Zibro. For more details, please refer to the
MANUAL (pages 45 ff.).
1
Remove all packaging materials (Fig. A).
2
Fill the removable tank
3
Insert the plug into the wall-socket.
4
Ignite the heater using the
5
If required, change the temperature using the adjustment keys
(refer to Section E).
6
Switch off the heater by pressing the
•
The first time you ignite your heater it will smell
like 'new' for a short time.
•
Store your fuel in a cool and dark place.
•
Fuel has a limited shelf life. Start every heating
season with renewed fuel.
•
The right quality of fuel will be assured, when you
use Zibro Extra or Zibro Kristal for your heater.
•
If you change to another brand and/or type of
parrafin oil, you must first finish up all the
remaining fuel in the heater.
(refer to Section B, Fig. C).
key (refer to Section D).
key .

MAIN COMPONENTS

³
Front plate
·
Grid
»
Base plate
Lid for removable
tank
´
Operation panel
²
Handle
¶
Removable tank
º
Air filter
¾
Vent filter
µ
Thermostat
¸
Plug + cord
¹
Information display
key
Childproof lock
Adjustment keys
(time and
temperature)
TIMER
SAVE key
Indicator lights
EXTENSION
Air quality control
system
4
43