Velocity Display Resolution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FPM (.01 MPS)
Velocity Accuracy: . . . . . . . . . . . . . . . . . . . 3% RDG + .5% Full Scale at 77°F (25°C)
Up to 256 point averaging for airflow
Datalogger
Datalogger Temperature Range . . . . . . . . . . . . . . . . .-40°F to 185°F (-40°C to 85°C)
Temperature Accuracy: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+/-2°F (+/-1°C)
Record Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2048
Sampling Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 minute to 255 minutes
MFM300 Warranty/Obtaining Service
The MFM300 Instrument is warranted against defects in material or workmanship for
two (2) years from date of purchase. Cooper-Atkins Corporation will replace or repair
the defective instrument, at their option, subject to verification of defect. All MFM300
probes and accessories are warranted against defects in material or workmanship for
one (1) year from date of purchase. Cooper-Atkins Corporation has the option to replace
or repair the defective accessory, subject to verification of defect. These warranties
exclude all incidental and consequential damages. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the foregoing limitation may
not apply. Except for the warranty set forth above, Cooper-Atkins Corporation, by this
disclaimer, gives notice that any statements or representations made by it will not create a
warranty that this product is fit for any particular purpose. Such statements,
epresentations or descriptions are informational only, and are not madeor given as a
warranty of this product in any way. In addition, Cooper-Atkins Corporation does not
warrant expressly, or by implication, that the electronic instrument will meet or comply with
the requirements of any safety code or regulation of any country, or any municipality, State,
Federal or other jurisdiction. Furthermore, Cooper-Atkins Corporation shall not be
responsible for any loss or damage to customer, directly or indirectly, and whether
arising in contract or tort.
MFM300 Instrument Service Information
If your MFM300 requires service, send the instrument freight prepaid to Cooper-Atkins
Corporation. For warranty service, also send proof of date and location of purchase. The
instrument will be repaired or replaced, at the option of Cooper-Atkins Corporation, and returned
via least cost transportation.
For non-warranty service, send $80 check or money order, as a diagnostic fee. An estimate to
repair the instrument will be provided before repairs are initiated. The $80 diagnostic fee will be
credited toward the repair cost and the instrument will be returned via least cost transportation.
There is a 90-day warranty on repaired MFM300 instruments.
MFM300 Extended Service Plan
Includes:
• Additional 3 Year warranty on instrument only (total of 5 years from date of purchase)
• MFM300 Datalogger Kit
• Computer Connection Cable
• Free on-line firmware upgrades/updates
• Free on-line refrigerant updates
To purchase the MFM300 Extended Service Plan please see the back cover of this instruction
manual.
For additional information, contact Cooper-Atkins Corporations customer service department.
10