Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Important Information |
How to Use
WARNING:
Do not leave child unattended. Inside car temperatures can rise rapidly and create a safety
hazard. Children have died when left unattended inside vehicles. This is not a toy. Use for
intended purpose only. Do not allow children to play with it. Loose parts (suction cups) must be
kept out of reach of children to prevent a choking hazard.
NOTE: Check state and local laws for use restrictions on side windows. Do not operate
window while product is installed. Discard all packaging components before use. Discard
and replace at first sign of weakness or damage. May not be compatible with aftermarket
window tint film. Not for use on windshield or rear window.
INCLUDED PARTS
a
4
Included Parts
b
c
a. Suction Cup
b. Suction Cup Housing
c. Clip
d. Snap
INSTALLING YOUR SHADE
1. Make sure window is clean and dry.
2. Place suction cup in top corner of window.
3. Prepare clip in the opened position. Push suction cup housing against window,
flattening out suction cup as much as possible. Figure A.
4. Flip the clip into closed position to secure suction cup to the window surface. Figure B.
NOTE: Lightly wetting the surface of the suction cup may help with better adhesion to the
window surface.
5. Repeat steps 2-4 for remaining suction cups.
TIP: For a more tailored fit on tapered or slanted windows, connect snaps on same side of
shade, gathering excess fabric. Figure C.
d
Fig. A
How to Use
Fig. B
Fig. C
5
Publicidad
Tabla de contenido
