Scope Of Supply; Intended Use; Installation Conditions - BWT Bewados E 3 Instrucciones De Montaje Y De Servicio

Aparato de dosificación de sustancias minerales
Ocultar thumbs Ver también para Bewados E 3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28

Scope of supply

Scope of supply
Scope of supply
Scope of supply
Scope of supply
GB GB
GB GB
GB
®
Bewados
module mineral substance metering unit
with the option of connection to the HydroModul
system or a separate connecting module or DR
connecting module (not included in delivery), con-
sisting of:
1 1 1 1 1 Transformer plug, 230V~/12V~
2 2 2 2 2 Connection cable
3 3 3 3 3 Metering pipe
4 4 4 4 4 Injection point
5 5 5 5 5 Electronic controller with:
6 6 6 6 6 Display (7-segment, 2-digit) for operation/
metering frequency, reserve/empty message,
faults
A A A A A Terminal for power supply
B B B B B Connection socket for internal wiring
C C C C C Connection socket for water metre cable
D D D D D Connection socket, unassigned
E E E E E Connection terminals, unassigned
F F F F F Connection socket for suction lance connector
T1
T1
T2
T2
T1 and T2
T1
T1
T2
T2 setting buttons for factor
7 7 7 7 7 Cap
8 8 8 8 8 Suction pipe [E3]
9 9 9 9 9 Suction lance [E20]
10
10
10 Connection cable gland
10
10
11
11 Childproof lock
11
11
11
12 Suction lance connector
12
12
12
12
13
13 Suction line
13
13
13
14
14 Return line
14
14
14
- - - - - 2 hose clamps [E20]

Intended use

Intended use
Intended use
Intended use
Intended use
Bewados
®
module mineral substance metering units
are used for metering BWT Quantophos mineral ag-
gregate combinations.
Function
Function
Function
Function
Function
The water metre in the mineral substance metering
unit measures the water volume flowing through and
sends pulses to the electronic controller. The con-
troller controls the drive motor for the piston meter-
ing pump, which proportionally adds the active sub-
stance to the water flow using the injection point
(4 4 4 4 4 ). The metering frequency appears on the display
(6 6 6 6 6 ).
A built-in level monitor switches the unit off auto-
matically once the active metered substance has
been used up to prevent the metering pump from
running dry. An audio signal is also emitted.
12
12
12
12
12
The self-monitoring electronic controller reliably
prevents improper overdosage if a fault occurs and
switches off the unit. The fault appears on the dis-
play (6 6 6 6 6 ) and is indicated by an audio signal.
Bewados mineral substance metering units are
DVGW, ÖVGW and SVGW tested in the original
ex-works settings with Quantophos F mineral sub-
stance combinations.
Replace container indicator/audio signal: If in-
Replace container indicator/audio signal:
Replace container indicator/audio signal:
Replace container indicator/audio signal:
Replace container indicator/audio signal:
dicator
appears and the audio signal is emit-
ted, the active substance container must be re-
placed (indicator
flashes without
= reserve).

Installation conditions

Installation conditions
Installation conditions
Installation conditions
Installation conditions
Observe all applicable installation regulations, gen-
eral guidelines and technical specifications.
In keeping with §16 of the German regulations on
the preparation of drinking water, notify residents
that the dosing unit is installed and explain how it
works and what active substance is used.
Note: According to A
Note:
Note:
Note:
Note:
According to A
According to A
According to A
According to AVB
VB
VB
VB W W W W W asser
VB
the water supply compan
the w
the w
ater supply compan
ater supply company or a par
ater supply compan
the w
the w
ater supply compan
in the w
in the w
in the w
in the water supply compan
in the w
ater supply company' y' y' y' y's inde
ater supply compan
ater supply compan
ater supply compan
ma
ma
may install the unit or modify its basic design.
y install the unit or modify its basic design.
y install the unit or modify its basic design.
y install the unit or modify its basic design.
ma
ma
y install the unit or modify its basic design.
If hot-water units are installed downstream, a non-
return valve should be installed. Metering units
have an integrated non-return valve and must not
be installed between the hot water heaters and
excess pressure valve.
A protective filter must be installed upstream from
the mineral substance metering unit to protect the
unit from foreign particles.
The installation site must be protected against frost
and must guarantee the protection of the unit from
all types of chemicals, paint, heating oil, lees, sol-
vent vapours, heat sources above 40°C and di-
rect sunlight.
The electrical outlet must be no more than 1.2m
from the mineral substance metering unit.
without
without audio signal
without
without
asser
asser
asser V §12.22, only
asser
V §12.22, only
V §12.22, only
V §12.22, only
V §12.22, only
y or a par
y or a party registered
y or a par
ty registered
ty registered
ty registered
y or a par
ty registered
s inde
s inde
s index of fitters
s inde
x of fitters
x of fitters
x of fitters
x of fitters

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bewados e 10Bewados e 20

Tabla de contenido