Getting Started; Installation - Coby CSMP67 Manual De Instrucciones

Getting Started

 Â

Installation

1. Connect the left and right channel speaker cables to the corresponding audio output jack on the
system's rear panel.
2. Connect the 3.5mm wire control to the audio frequency output jack of the external device (CD player,
computer, TV, etc), and plug the RCA end into the signal input jack of the main unit.
3. Confirm that all connections are correct and secure, then connect the power cable of the woofer to the
AC 120V 60Hz power supply.
Page 4 Page 4 Getting Started Getting Started