___________________________________________________________________________
5
Operating and
adjusting
5.1 Safety instructions
The Potrero415 conference table should only be
used and operated in faultless condition and in
compliance with the instructions in the user
manual.
Before attaching desk utensils to accessories,
ensure the following:
■
Ensure that the conference table has been
assembled in accordance with the provided
assembly instructions.
■
The maximum permissible load-bearing
capacity of the conference table and of the
accessories must not be exceeded.
Danger from electrical
voltage!
The metal fasteners between table top and
table frame may be energised in case of
damage to live cables and connectors.
Do not earth electrical
devices on the table frame!
Risk of injury and damage!
When loading the assembled conference
table or its accessories with a weight higher
than the approved weight, the fastening
screws may tear.
Note the permissible weight.
Risk of injury and damage!
Transporting a table that has already been
assembled may result in injury or damage.
Only transport the conference table
when it has been dissassembled!
132337
Operating and adjusting
Liquids damage the contacts of the
sockets!
Do not pour liquids over the cable ducts
or sockets!
Coalesse PowerPod
The arrangement of more than 3
power units can lead to damage to the
electrical installation!
Connect a maximum of 3 power units to
each other!
Power Module
In Germany, France und Switzerland:
The arrangement of more than 2
power units can lead to damage to the
electrical installation!
Connect a maximum of 2 power units to
each other.
In the United Kingdom:
The arrangement of power units is not
offered. It can lead to damage to the
electrical installation!
Use only one power unit.
The table is only voltage-free if all plugs
are disconnected from the mains.
9