Remove the transport lock for the pump from the
2.
top of the appliance.
Secure the transport lock to the rear of the appli-
3.
ance for further use.
Install the oil filter.
4.
Place the lid into the opening and move it to the left.
5.
6.
WARNING ‒ Risk of tipping! After removing
the transportation lock, the drawer may open and
the appliance may tip over.
Keep the drawer closed.
▶
Weigh down the appliance with a weight.
▶
Only open the drawer if the tilt protection is in-
▶
stalled.
Remove the transport lock screws.
Insert the power cord at the rear of the appliance.
7.
Preparing the appliance en
11