Gaggenau DV061100 Instrucciones De Montaje página 14

en Installing the furniture panel
Stick the double-sided adhesive tape to the front
5.
panel as an installation aid.
Align the furniture panel and push the front panel
6.
on.
The furniture panel sticks to the front panel.
a
Carefully open the drawer.
7.
Mark the top edge of the front panel on the furniture
8.
panel.
Detach the front panel with the furniture panel.
9.
Check the position of the front panel on the furniture
10.
panel.
14
Mark the elongated holes.
11.
Loosen the front panel from the furniture panel and
12.
remove the double-sided adhesive tape.
Drill the holes in the middle of elongated holes.
13.
Countersink the holes.
14.
Screw in the threaded sleeves until they are flush
15.
with the surface of the furniture panel.
Install the handle on the furniture panel because the
16.
screws for the handle are no longer accessible fol-
lowing installation of the front panel. The screws for
the handle must be countersunk.
Place the front panel on the furniture panel and
17.
align it.
Screw the front panel in loosely using the concave
18.
washers and the screws. Do not tighten the screws
to ensure that the panel can still move.
Realign the front panel with the furniture panel.
19.