Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Specifications ................................................................ 6
Assembly ....................................................................... 7
Setup .......................................................................... 8-9
Operation ..................................................................... 10
Maintenance ................................................................ 11
Spanish ........................................................................ 13
French ......................................................................... 25
Greenlee / A Textron Company
Description
This Greenlee UT2 Cable Pulling System is intended
to pull cable through conduit for light-duty applications.
Typical applications might be: pulling 3x500 kcmil (mcm)
cables 100 feet or 3x 3/0 AWG cables 200 feet.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request
at no charge. See back page of manual for contact
information.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
2
UT2 Cable Pulling System
UT2 Cable Pulling System
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070