Dewpoint Mode; Datalogger - SKF TKTL 40 Instrucciones De Uso

5.4 DEWPOINT mode

The percentage shows how close the measured IR temperature is from
the Dewpoint temperature. When the scale is at 100%, the measured IR
temperature is at the dewpoint level.

5.5 Datalogger

Press the trigger once to start the datalogger measurements.
Press the ESC buttom to quit the DATALOGGER mode and automatically
save the data to the internal memory or memory card.
Note:
Deine the measurement recording interval in the logs time setting.
The logs can be visualized from the gallery or downloaded on a
computer with the USB connection.
16
Press and hold trigger to
start measuring.
SKF TKTL 40