Remote Lcd Screen Indicators; How To Use The Basic Functions - CIAT RG57A8(B)/BGEF Manual De Instrucciones

Remote LCD Screen Indicators

Information are displayed when the remote controller is powered up.
Transmission Indicator
Lights up when remote sends
signal to indoor unit
ON/OFF display
MODE display
Appears when the unit is turned on,
Displays the current
and disappears when it is turned off
mode, including:
TIMER ON display
AUTO
Displays when TIMER
COOL
ON is set
DRY
HEAT
FAN
FAN SPEED display
Not available for this unit
Displays selected FAN SPEED:
HIGH, MED,
or LOW
Temperature/Timer display
This display is blank when
Displays the set temperature by default, or timer setting
set to AUTO speed or DRY mode.
when using TIMER ON/OFF functions
Temperature range: 17-30 C
Timer setting range: 0-24 hours
This display is blank when operating in FAN mode.
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.
TIMER OFF display
Displays when TIMER
OFF is set
ECO display
Not available for
this unit
Battery display
Low battery
detection
SLEEP display
Displays when
SLEEP function
is activated
FOLLOW ME
display
Indicates that
the FOLLOW ME
function is on
FRESH display
Not available for
this unit
SILENT display
o
5

How To Use The Basic Functions

2
3
ON/OFF SHORT
CUT
1
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP FRESH
TURBO CLEAN LED FOLLOW
COOL operation
1. Press the MODE button to select
COOL mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed: AUTO, LOW, MED,or
HIGH.
4. Press the ON/OFF button to start the
unit.
SETTING TEMPERATURE
The operating temperature range for units is
O
17-30 C. You can increase or decrease the
O
set temperature in 1 C increments.
AUTO operation
In AUTO mode, the unit will automatically
select the COOL, FAN, HEAT or DRY mode
based on the set temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFFbutton to start the unit.
,
NOTE: FAN SPEED can t be set in Auto mode.
4 ON/OFF SHORT
CUT
1
MODE TIMER
ON
TEMP
3
TIMER
FAN
OFF
SLEEP FRESH
LED
TURBO CLEAN FOLLOW
6
2