SKINERA 1612 022 MULTI Instrucciones De Uso página 4

Directions for use
EN
1. Install the batteries (see section "Installing batteries").
2. Make sure the brush head is securely attached.
3. Dampen your face with lukewarm water.
4. Moisten the brush head with lukewarm water and apply
cleansing lotion onto the brush head.
5. Press the ON/OFF button to turn on the device. The brush will
rotate at low speed. For high speed, press the button again.
6. Gently apply the brush to the skin. Do not apply force. Move
the brush in a slow, upward, circular motion.
7. To switch off the device, press the button again.
8. Rinse your face with water and pat dry with a towel.
• It is recommended not to cleanse your face for more
than 1 minute.
• For daily use, in the morning and at night. But if you have
very sensitive skin or other skin concerns, talk to your
doctor or dermatologist about frequency of use.
Installing batteries
1. Make sure Skinera Facial Cleansing Brush is
turned off.
2. To remove the battery compartment twist it
clockwise so it opens.
3. Insert the two AA batteries provided. Use the
markings in the battery compartment as a
guide to position the +/- end of the batteries.
4. Place the battery compartment cover on the
device again and press firmly to close.
Warnings
• Do not mix old and new batteries.
• Do not mix alkaline, standard (zinc-carbon) or
rechargeable (nickel-cadmium) batteries.
2