Beper BP.101H Manual De Instrucciones página 9

EN
Electric Citrus Juicer Use instructions
COMPONENTS (Fig.1):
A. DUST LID
B. BIG CONE
C. SMALL CONE
D. STRAINER
E. GRADUATED JAR
F. SHAFT
G. MOTOR BASE
FUNCTION
Before using the appliance for the first time, wash all parts except for the motor base. Insert the graduated jar on
the shaft, making sure that it is aligned with the appropriate joints on the base.
Place the filter and the cones correctly.
Plug the appliance into the power socket.
The appliance automatically switches on by pressing the cone with the selected citrus cut in half. The direction
of rotation can be clockwise and counterclockwise for better and more complete squeezing.
The appliance is equipped with 2 different interchangeable cones depending on the type of citrus to be pressed,
in case of large cone use, simply place it on the top of the small one until it will be block.
CLEANING
CAUTION: Never immerse the motor base in water or other liquids.
It is recommended to clean the appliance immediately after use.
Before cleaning the appliance, disconnect the plug from the socket and completely remove the components.
With the exception of base and cable, all parts are washable with lukewarm water and dishwashing detergent
(do not use dishwasher).
The motor base must only be cleaned with a damp cloth. Never clean with diluents, detergents for plastic, glass
or the like as they may damage the appliance
TECHNICAL DATA
Power: 25W
Power supply: 220-240V ~50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9