Connecting The Monitor And Turning The Monitor On And Off; Connecting The Monitor To A Power Source - Sharp LL-T2010W Manual De Funcionamiento

Connecting the monitor and turning the monitor on and off

Connecting the monitor to a power
source
Use only the AC adapter supplied.
Notes:
- Do not overly bend the cable or add extension
cords as this could lead to malfunction.
1. Remove the stand cover.
(Rear View)
2. Remove the cover.
Cover
3. Connect the AC adapter to the monitor's power
terminal.
Power terminal
Place cord
on hook
4. Replace cover.
Cover
5. Connect power cord to AC adapter.
Fitting the AC adapter inside the stand
Stand cover
Lift one side
6. Replace stand cover.
7. Place power plug into AC outlet.
Run cord
through hole.
AC adapter
12
Place adapter
inside stand
cavity.
2
1
Power cord
Wind the cord
Stand cover
1