REMIS REMItop vista Instrucciones De Montaje página 8

7. Inserting the roof window
• From the outside, position the roof win-
dow over the cut-out and carefully set it
into the cut-out so that there is an equal-
US/GB
ly-sized gap all around between the roof
cut-out and the outer frame (do not line
up on just one side, on one edge of the cut-
out) and press it in.
• From inside the living area, hold the inside
frame to the roof cut-out and mount using
the screws provided.
• Tighten the Ø 4 mm screws alternately
in several stages, until the sealing cord is
pressed flat enough. The maximum tighte-
ning torque is 1.0 – 1.2 Nm and must not
be exceeded.
• After a settling time of approx. 1 hour, re-
tighten the screws with the same torque.
Push in cover caps (4).
8. Information for first use
• Reconnect the battery and any external
electricity supply.
8/24
3
4
• To check the functionality of the roof
window, open and close it as described
in the Operating Manual. The hood must
be easy to open and close