Before Use - Beper BP.580 Manual De Instrucciones

Electric Coffee Grinder Use instructions
It is advisable to grind only the amount of coffee you need and avoid
storing ground coffee for several days.
Product description Fig.1
1. Bean hopper lid
2. Bean hopper
3. Bean hopper holder
4. Bean hopper release button
5. Grind selector
6. Body
7. Ground coffee outlet

BEFORE USE:

Before using the appliance for the first time, wash the bean hopper, bean hopper lid, ground coffee container lid
and ground coffee container well, ensuring that they are rinsed and dried thoroughly.
USAGE:
Place the appliance on a flat surface.
Assemble the bean hopper to the bean hopper holder by following the operation as below: Firstly, put the bean
hopper into the bean hopper holder by making the tab on the bean hopper align with the groove on the bean
hopper holder and then turn the bean hopper clockwise until it is tightly locked into the bean hopper holder.
NOTE: The bean hopper is equipped with microswitch so that it must be assembled in position before
operate, or the appliance will not work.
Pour appropriate amount of coffee beans into the bean hopper (q.ty Max 360gr).
Close the bean hopper lid.
Put the ground coffee container (with lid in position) on the ground coffee container holder.
Select your desired coffee grinding while using the grind selector . Possible selections from 1 to 15. (1= fine –
15=coarse).
The coffee-dispensing amount is determined by grinding time, therefore, you can turn the knob to select your
desired grinding time by referring to " Table 1" before switch on the appliance. When select, the corresponding
indicator of your selected grinding time will light up. If you do not want to adjust the grinding time, the appliance
will work under the default grinding time.
Indicator The first indi-
cator (Default
setting)
(From left to 5 minutes
right)
Connect the appliance with the power source, the first indicator (the default grinding time setting) lights up au-
tomatically.
Press the Start/Stop button, the appliance starts to grind coffee bean. The indicator of Start/Stop button keeps
blinking during grinding process.
You can press Start/Stop button to make the appliance stop running at any time during grinding process.
Attention:
The appliance will enter into the sleep state if no any operation within 90 seconds after plug in.
The maximum amount of ground coffee container is 150g, make sure the coffee ground shall not overflow.
The appliance must rest for 30 minutes if it is operated for 5 minutes continuously. And it is suggested to ope-
rate this appliance for less than 90 seconds per time and minimum 90 seconds rest time must be maintained
between continuous two cycles.
If there is resistance while adjusting ,the grind size should be adjusted while the motor is running to prevent
burr jamming.
When desired grinding time has reached, the coffee grinder will stop working automatically and go back to
standby mode.
Unplug the appliance, remove the ground coffee container lid and pour out the coffee ground directly.
8. Ground coffee container holder
9. Ground coffee container
10. Groound coffee container lid
11. Quantity selector knob
12. Start/Stop button
13. Removable grinder
14. Handle for removable grinder
The second The third
indicator indicator
10 seconds 20 seconds
10
The fourth The fifth
indicator indicator
30 seconds 40 seconds
The sixth
indicator
50 seconds