Konig Security SEC-DVR200 Manual De Uso página 5

Overview menu:
Camera Select
Record Select
Record Mode
Record Frame Rate
Video Quality
Record Schedule
Sub Menu
Hard Drive Setup
Motion Setup
Restore Factory Default
Camera select:
The recorder can display 4 cameras
in one picture (Quad Mode).
Confi gure which camera to display:
Press " Select" to modify setting
and press " CH1", "
" CH3", " CH4" to set each
channel separately. If no channel
is open, the recorder will
display "OFF".
Record select:
Select which camera(s) need to be recorded. Press "
is established.
Record mode:
There are two methods of recording
Each Mode
Record each channel separately, therefore it's possible to enlarge single channel to full
screen display. For example, turn off record function of CH-1 and CH-2 and then the
recorder only record CH3 and CH4.
Press " CH1", " CH2", "
after recording.
CH2",
CH3", " CH4" to choose channel to display when playback
5
Auto Record
Password Setup
Password Change
Picture Setup
Time Setup
Select" until desired selection