EAS ELECTRIC EWY8614W Manual De Usuario página 57

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCES
Cleaning Drain Pump Filter
Warning!
Be careful of the hot water!
Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Open the lower cover cap
Open the filter by turning
to the counter clockwise
Caution!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
• Some machines don't have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
V2
1
Rotate 90°C and pull out
the emergency drain hose,
and take off the hose cap
4
Remove extraneous matter
2
Emergency
drain hose
5
10 24
After water runs out,reset
the drain hose
Close the lower cover cap
3
6

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido