Introduction & Features; Safety Instructions - Perel EVM890 Manual Del Usuario

EVM890 – STANDARD DIGITAL MULTIMETER
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the EVM890! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer. The EVM890 comes with test leads,
thermocouple (K type, 400°C), a battery (9V), this operating manual, a holster.
Your EVM890 is a professional digital multimeter with a 3 ½ digit LCD display. It is ideally suited for field, lab, shop,
and home applications. By using the latest in IC and display technology to significantly reduce the number of discrete
internal components, the multimeter gives you superb measuring capability as well as the highest possible reliability.
It is capable of performing functions:
DC Voltage
DC Current
Temperature
Also diodes and transistors (amplification hFE) can be tested.

2. Safety Instructions

This multimeter is designed to ensure the safest operation possible. However, safe operation depends on you, the
operator. Make sure you follow these simple safety rules:
• Never apply a voltage to the multimeter that exceeds the limits given in the specifications. Never apply more than
1000V DC or 700V rms AC between an input jack and ground.
• Use extreme caution when working with voltages above 60V DC or 30V AC rms.
• Always discharge filter capacitors in the power supply circuit under test before you attach test leads.
• Never connect to a source of voltage when you select the DCA, ACA, resistance measurement or continuity
check function.
• Always turn off power and disconnect the test leads before you replace the batteries or fuse.
• Never operate the multimeter unless the battery cover is in place and fully closed.
When carrying out measurements on TV or switching power circuits, always remember that there may be high
amplitude voltages pulses at test points which can damage the meter.
3. Description
To install the temperature probe, do not hesitate to push it firmly till the bottom of the socket.
EVM890_v2
AC Voltage
AC Current
Frequency
Resistance
Continuity
Capacity
3 PEREL