BST MX62BT-DSP Manual De Instrucciones página 4

7. CH1 PAD: Press the switch to attenuate the signal of Channel 1 by 20dB
8. MIC/LINE/INST: Connect a microphone, line level device or guitar to this input.
9. INST/HI-Z: Press this switch when a guitar is connected to the input (8).
10. CH2 PAD: Press the switch to attenuate the signal of Channel 2 by 20dB
11. GAIN: Gain controls for channels 1 & 2.
12. EQ HIGH: Setting of the high frequencies of CH1/CH2
13. EQ LOW: Setting of low frequencies on CH1/CH2
14. FX: Press the switch to add a DSP effect to the signal of CH1/CH2.
15. LEVEL: CH1/CH2 level control.
16. MONO/STEREO: In the upper position the overall output will be mono.
17. CLIP LED: Lights up when the signal of CH1/CH2 is overloaded
18. CH3/CH4 INPUT: Line inputs for channels 3 & 4. Will accept a balanced or unbalanced signal.
19. CH3/CH4 GAIN: Press the GAIN switch to attenuate the signal of Channel 3 & 4 by 20dB
20. FX: Press the switch to add a DSP effect to the signal of CH3/CH4.
21. CH3/4: Level control of channel 3 & 4.
22. CH5/CH6 INPUT: Line inputs for channels 5 & 6. Will accept a balanced or unbalanced signal.
23. CH5/CH6 GAIN: Press the GAIN switch to attenuate the signal by 20dB
24. CH5/6: Level control of channel 5 & 6.
25. FX LEVEL: DSP level control.
26. DIGITAL EFFECT PROCESSOR: Rotate the button to choose from 16 DSP effects.
27. USB/BT: Select between PC music and Bluetooth music
28. MAIN/PHONES: Select between the USB or BT signal that you wish to monitor in the headphones.
29. USB/BT LEVEL: USB/BT level control.
30. BLUETOOTH: Press the Bluetooth switch to start working in Bluetooth mode.
31. BLUETOOTH LED: Lights up when the unit is working in Bluetooth mode
32. LED VU-METER: The device has two rows of LEDs, which display the Left and Right output level.
33. PHONES: Sets the volume of the headphones.
34. MAIN: Master level control. Sets the overall output volume
35. HEADPHONE: Connect your headphones via a 6.35mm stereo jack to the mixer.
36. 6.35mm JACK MASTER OUTPUTS: Unbalanced Left & Right line level output.
37. BALANCED OUTPUT: Balanced Left & Right output via XLR connectors.
©Copyright LOTRONIC 2017 MX62BT-DSP 4