Appliance description
1
Indentation = here is where the measuring tape starts with „0"
2
Measuring tape
3
Water glasses for spirit level function
4
Digital display
5
Button „Laser + Display on" – „Laser out" – „Display out"
6
Release button for the measuring tape
7
Battery compartment
8
Laser exit opening
Inserting the batteries
•
Open the battery compartment
shown in the diagramme. Close the battery compartment.
The appliance is now ready for use.
•
When the battery symbol
replace the batteries as described in the technical data.
Utilisation
Digital Laser Tape Measure – Switching On/Off
•
Press on the button
– once, to switch on the digital display
– twice, to switch the laser back off.
– three times, to also switch the digital display
7
and insert two batteries as
appears in the digital display
5
- 25 -
4
and the laser.
4
back off.
4
,