Cleaning And Maintenance; Maintenance - Kompernaß KH3259 Instrucciones De Uso

Cinta métrica láser digital
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Mark the required points.
Press once on the button
Note:
Should you wish to project a horizontal line on the wall, tip the
appliance through 90 degrees. Align the Digital Laser Tape
Measure with the help of the water glasses

Cleaning and Maintenance

To avoid eye damage:
First remove the batteries
prevent the inadvertent switching on of the appliance during cleaning.
Clean the appliance with a dry or lightly moistened cloth only.
To avoid potential damage to the upper surfaces, do not use any
abrasive cleaning agents or detergents.
If contamination is visible at the laser exit opening
remove it with a cotton stick.

Maintenance

NEVER open any parts of the appliance. Arrange for the
appliance to be repaired by specialists only.
The appliance is maintenance-free. No form of maintenance,
either on or in the appliance, is intended for execution by the user.
In the event of malfunction or apparent damage, make contact
with Customer Services.
5
to switch the laser off.
7
before cleaning the appliance. This will
- 27 -
3
for horizontal lines.
8
, carefully

Publicidad

Tabla de contenido
loading

Tabla de contenido