Remote Control Programming - SmartSun Osaka Manual De Instrucciones

6. Additional functions motor:
Closing limit switch
Make sure the power is on Press the UP (^) button once.
Use a special regulator to select the "+" position and turn the white screw to increase
the distance.
When you have reached the desired limit distance, stop pressing the white screw and
press the stop button.
Configuration OK
Warnings: when the engine is running, stop turning the regulated screw.
Opening Limit Regulator
Make sure the power is on Press the DOWN button (v) once.
Use a special regulator to select the "+" position and turn the red screw to increase the
lowering distance.
When you have reached the desired limit distance, stop pressing the red screw and press
the stop button
Confuration OK
Warning: When the engine is running, stop turning the regulated screw.

Remote control programming

Unplug the awning from the electric connection.
Wait 10 seconds and plug the awning back into the electric connection.
Press the light ON / OFF button at the same time until you hear an engine beep.
OK configuration.
Manual opening and closing function of the awning.
This awning can be operated manually in case of engine failure.
The crank must be inserted into the ring. To open the awning, turn the clockwise direc-
tion. To close the awning you must turn counterclockwise.