Hud Configuration - Primer LP-08 Manual De Instrucciones

Ocultar thumbs Ver también para LP-08:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
Beep: Option permitting the buzzer to be disabled. By default it is enabled.
RABC/Traceability: The information for each wash is registered, and the following information
saved:
At the start of each cycle: Programme, start time, weight (where applicable). During the programme, every
15 seconds: Level, temperature and error (where applicable). When downloading the data, the required
period must be selected (by default, start date and end date, today's date).
The data will be saved for a minimum of 15 days.
Each time there is a download, an "RABC" will be created in the USB root directory. Each RABC file name
will take the following format: RABC_Model_Date_time.rabc..
4.2.1

HUD configuration

Configuration of the parameters to be displayed on the OFF screen, main screen and run screen, in addition to
configuration of the automatic shutdown and energy saving.
Access: [Main screen]
allocated to the identifier can be edited (between 1 and 99). By default it is disabled. This identifier
is obligatory if remote communication is used.
26
OFF screen: These are the parameters that can be configured:
Machine identifier: The machine identifier can be enabled/disabled, and the number to be
[Main Menu]
[Configure system]

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido