Electrical Safety; Safety Instructions - Roadstar EP-1050 Manual De Instrucciones

EP-1050
Hot Plate with Thermostat control
Before Use
Carefully remove your new appliance from its packaging.
You may wish to store the packaging for future use.Otherwise dispose the packaging
according to the local rules on recycling.
Please read this instruction manual carefully and familiarize yourself with your new appliance
before using it for the first time. Please retain this manual for future reference.
BOX CONTENTS
Hot Plate EP-1050
•
• Instruction manual
• Warranty card

ELECTRICAL SAFETY

Caution: For your own safety read the following instructions carefully before attempting to
connect this unit to the mains. Before switching on make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate.
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power
sources may damage the unit. Do not allow this unit to be exposed to rain or moisture.

SAFETY INSTRUCTIONS

IMPORTANT: DO READ THESE INSTRUCTIONS BEFORE USING YOUR COOKING PLATE
AND RETAIN THEM FOR FUTURE REFERENCE, ALWAYS FOLLOW THEM CAREFULLY.
• Choose a position convenient to an electrical socket but away from sources of water.
• The work surface must be heat resistant, dry and approximately 75cm high.
• A gap of at least 5cm must be left around the sides of the appliance, since the sides
of the appliance may become hot during use.
• The mains cable must not be permitted to touch any part of the appliance and must
be kept out of the reach of children.
• Do ensure this appliance is positioned away from the edge of work surfaces and out
of the reach of children and people in sensitive to heat.
• This appliance must not be positioned beneath cupboards.
• Do not attempt to move cooking plate until completely cooled down nor whilst pan(s)
are stood on them.
English 1
•
•
•
•
•
•
•
CAUTION
DO NOT SWITCH ON THE COOKING PLATE WITHOUT CONTAINER ON TOP OTHERWISE
THE PRODUCT WILL BE DAMAGED.
FEATURES
A.
B.
C.
D.
2 English
Ensure pans are situated centrally on the cooking plate(s) and pan handles are
safely positioned.
Care must be taken when using oil or fat for cooking. Do ensure overheating does
not occur, by maintaining close supervision at all times.
Once the cooking is over, turn the switch to 0 position.
Ensure to unplug the cooking plate from the electrical socket after use.
Do not leave the appliance unattended in the presence of children.
Do not place the unit near the cloth such as curtain in order to pervert fire.
No user-serviceable parts inside - refer to qualified service personnel.
Hot Plate Base
Diam. 105 cm plate
Plate On Indicator
Thermostat
C
B
A
D