Beper BT.710Y Manual De Instrucciones página 8

Crepe maker Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
Some warnings:
1. : this symbol indicates that the product reaches high temperatures and there is the risk of burn.
1. Never immerse the product or power cord in water or other liquid.
2. Always use extreme care when the product is used near and / or in the presence of children.
3. Always unplug the product from the power outlet when not in use and while cleaning.
4. Allow the product to cool down before proceeding with any cleaning operations and before storing.
5. Do not use the product if the power cord and / or some components are damaged.
6. This product is for household use only.
7. Do not let the cord hang over the edge of a table or counter, or/and touch hot surfaces.
8. This product should be used only for the purpose for which it was designed.
Description of the product: Fig.1
1. Non-stick cooking plate
2. On/Off switch
3. Handle
4. Bowl for batter
Use:
1. Remove the packaging and check the integrity of the product.
2. Clean the non-stick plate with a soft, slightly damp cloth. Dry carefully.
3. Clean the bowl with water and neutral soap, rinse well and dry.
4. Place the product and the container on a flat and stable surface, making sure you have enough space to move
and keep away from walls and / or cabinets.
5. Connect the power cord to a power outlet. Switch the power button on "I=ON", the power button will light red,
indicating that the product starts to heat up.
Note: For the first (1-2) uses, it may be that the product emits a little smoke and a slight burning smell. This is
normal and does not preclude the good use of the product. However, it is advisable not to use the first crepes but
to do some for the sole purpose of starting the appliance.
8