mundoclima R51M/E Manual Del Usuario página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TEMP Button
1
temperature setting.
TEMP Button
2
temperature setting .
MODE Selection Button: Each time the button is pressed, the
3
operation mode is shifted in the direction of the arrow:
AUTO
NOTE: COOL only model has no HEAT feature.
4
SWING Button: Push this switch button to activate auto
swin gfeature of the horizontal louver. Push it a g ain to sto p.
RESET Button: When you press the recessed RESET button,
5
all current settings are cancelled and the control will return to
the initial settings.
6
AIR DIRECTION Button: Press this button to change the swing
angle of the louver. The swing angle of the louver is 6 for
each press. When the louver swing at a certain angle which
would affect the cooling and heating effect of the air conditioner,
it would automatically change the swing direction . No symbol
will appear in the display area when press t his button. (Not
applicable to units without this function).
LED DISPLAY Button: Press this button to clear the digit
7
display in the air conditioner, press it again to activate it (Not
available for the units without LED display window).
8
FAN SPEED Button: Used to select the Fan Speed in four steps-
AUTO LOW
the fan speed mode is shifted.
ON/OFF Button:
9
button again to stop operation.
TIMER ON Button: Press this button to initiate the auto-on time
10
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10:00, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-on time
to 0:00.
SLEEP Button: Press this button to go into the Energy-Saving
11
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
NOTE: While the unit is running under SLEEP operation
mode, it would be canceled if you press the other button.
: Push this button to decrease the indoor
: Push this button to increase the indoor
CO OL
MED or HIGH. Each time the button is pressed,
Push this button to start operation, push the
DRY
HEAT
12
FAN
o

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido