Symbols; Charging The Battery Pack - Beurer HK 72 Manual De Instrucciones

Banda térmica portátil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Symbols

Read instructions!
Do not use when folded
or bunched up
Do not insert needles!
Package Contents
• Heat wrap
• Battery Pack (Type: WE-211)
• Power Supply Unit (Charger)
Parts and Controls
1. Power Supply Unit (Charger)
2. Battery Pack
3. Power Socket for the Battery Pack
4. Power Adapter Plug
5. Heat wrap Connector Plug
6. Temperature Setting LEDs 1-4 (blue)
7. Battery Level LED (green)
8. Power/Control Button

3. Charging the Battery Pack

Charge the Battery Pack before initial use and if the device has not been used for a long period. To charge:
1. Connect the Power Adapter to a standard 110 VAC electrical outlet.
2. Insert the Power Adapter plug into the Connection Socket on the Battery Pack. When charging, the green
Battery Level LED will flash.
3. The Battery Pack is fully charged when the Battery Level LED stops flashing and displays steadily (2-3
hours for a completely discharged Battery Pack). Disconnect the Power Adapter Plug; the LED will shut
off. Charge the Battery Pack at least once per year to maintain its capacity.
WARNING
While charging, do not cover the Battery Pack. Only charge the Battery Pack in a dry environment at
normal room temperature.
Machine wash warm,
30 °C
86 °F
delicate cycle
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
1
2
3
4
4
5
6
7
8

Publicidad

Tabla de contenido
loading

Tabla de contenido