Lacor BRISK 220 Serie Instrucciones De Uso página 48

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
2.- Then, insert the attachment (8) and turn the anchor nut (7) counter-clockwise to secure it.
3.- Plug the blender in to a 220-240V/50-60Hz outlet.
4.- To start the blender, follow the steps below:
A.- Push the safety button (1)
B.- While keeping the safety button pushed, push the power button and the motor will
start spinning.
C.- Push the lock button (4) to keep the blender running continuously. The motor will
keep running indefinitely so you can use both hands to work more ergonomically.
5.- If you're using a model with variable speed, turn the speed control (2) and change the speed
to between 4.000 and 16.000 r.p.m.
6.- If you're using a model without variable speed, the speed doesn't change and by default it will
spin at a constant speed of 16.000 r.p.m.
7.- To turn off the blender push the power button again and the motor will stop running.
8.- Unplug the blender after each use.
NOTE:
If you want to use the whisk attachment (10), the procedure is exactly the same as
described in this section.
48

Publicidad

Tabla de contenido
loading

Productos relacionados para Lacor BRISK 220 Serie

Este manual también es adecuado para:

Brisk 350 serieBrisk 500 serie

Tabla de contenido