Cepex CTA075 Instrucciones De Instalación Y Operación página 5

4. Irrigation Programming
1. Open the top cover.
2. Set the irrigation time selector to the desired
irrigation duration.
3. Set the irrigation cycle time selector to the
desired cycle time.
4. Press the "START" switch.
The faucet/tap will open immediately and the
irrigation will commence, for the set duration
and cycle times.
For example:
• If you set the irrigation cycle time selector to
"1 Day" and the irrigation time selector to "30
MIN".
• The faucet/tap will open immediately upon
pressing the "START" switch and will remain
open for 30 minutes. The faucet/tap will open
at the same time on the following day for 30
minutes everyday.
· The faucet/tap will open every day at the time
you pressed the switch on the first day.
Please note:
duration and the cycle time even after you
activate the program by changing the settings of
the selectors.
You can change the irrigation
4
EN