Cepex CTA075 Instrucciones De Instalación Y Operación página 6

5. Programming an Irrigation Controller
with a Delayed Opening Time
For Example, a 3 Hr irrigation, once every 3 days
program, programmed to start 6 Hr later.
1. Set the irrigation time selector to 3 Hr.
2. Set the irrigation cycle time selector to "Delay".
3. Press and hold the "START" switch until you
hear 6 clicks, including the first click. (the
number of clicks corresponds to the number
of delay hours before the controller opens the
faucet/tap for the first time).
4. Set the irrigation cycle time selector to "3 Days".
When you set an odd number of delay hours
you will hear an additional click a few seconds
after releasing the switch. This click keeps the
faucet/tap closed until its first opening.
* To change the opening hour, remove the
batteries for 3 minute. Program the controller
from the start after replacing the batteries.
5
EN