CTX BIOCLEAN CONTROL Serie Manual De Instrucciones página 26

c) Move switch on "RUN" position
4.3.4 - Program, setting and description
Example:
program n.3: start, wednesday, time 9:03
program n.4: end, wednesday, time 11:04
program n.15: start "daily", time 23:54
Move right switch on "P" position
a) Select program n.3 pressing "P" button.
b) Set the day (wednesday=3), pressing "1...7" button
(day). It appears an arrow under the day of the week,
move it (by "1...7" button) under "3".
c) Set hour (9), pressing "h" button (hours). Press
it until reaching the desired value.
d) Set minutes (03) pressing "m" button (minutes)
Press it until reaching the desired value.
e) Pass to program n°4 pressing "P" button. Previous
operation will be saved.
f) Set day (wednesday=3) pressing "1...7" button
(day). It appears an arrow under the day of the week,
move it (by "1...7" button) under "3"
g) Set hour (11) pressing "h" button (hours). Press
it until reaching the desired value.
h) Set minutes (04) pressing "m" button (minutes).
Press it until reaching the desired value
i) Pass to program n°15 pressing "P" button. Previous
operation will be saved.
• 22 •