TOUCH CONTROL FEATURES
LOCATIONS OF SURFACE ELEMENTS AND CONTROLS
The surface burner elements are positioned in the same locations on the cooktop and the control panel for ease of use.
LCE3010SB Radiant Cooktop
Single
Left Rear
Element
1
3
Single
Left Front
Element
WARM: This pad lowers selected active element to the
1
lowest setting.
POWER ON/OFF: Touch the POWER ON/OFF pad to
2
turn the entire cooktop ON and OFF. When it is ON, the
cooktop is in standby mode until a Cooking Zone is
activated.
CHILD LOCK: Touch and hold for 3 seconds to activate
3
and deactivate the child lockout function.
Single
Center Rear
Warming
Element
Zone
2
Dual
Right Front
Element
PA RT S A N D F E AT U R E S
LCE3610SB Radiant Cooktop
Dual
Triple
Left rear
Center Rear
Element
Element
1
Single
Left front
Element
To set the element power level: Select the
number on the element power settings for the
active Cooking Zone to adjust the power level
from 1 to 9.
Hot Surface Indicator: The indicator light
below the HOT will illuminate when the
cooking area is hot. It will remain on, even
after the control is turned off, until the area
has cooled.
Warming
Zone
2
3
Dual
Right Front
Element
11